‘VANS’
CHOOSING A GOOD ONE
First
of all, before you’re going to the shop, you should know which one you really
want to buy and remember all information as much as you can. So, when you are
in the shop, you won’t waste your time with selection the one you like most.
After you got it, observing a condition of good is the most important. You need
to check the product carefully.
In
this step, you could begin with its shape. The real which is made in USA will
have a nice sharp head. The shoe’s edge must be closed differed from China and
Vietnams’ that quite bigger and the edge is straight down. Next, you may move
to inside of the shoe. A pumped square of US Vans must have the word ‘made in
USA’ below Vans that others’ don’t have. Then, look at the rubber label, the US
Vans must have the same color with its edge and pumped the word like inside
clearly. And then, importantly, observe under the shoe’s sole touch on the
ground. A honeycomb nearby the heel, at the middle, US Vans will be pumped a
little ‘R’ swelling out. After that, you have to consider the weight that US is
better in balance. Finally, look at the material, US has made every pair of
shoes by hand. The materials are definitely better than others’. Looking at the
rubber edge, when the US is used for a long time, its base will be loose as
hard as nylon eroding.
After
checking the condition of goods and any defect, you have to try walking around
with the new shoes because if it’s over tight, it will hurt your feet as well.
And when you get a satisfied one, please check again and make sure that it’s
the right one as you want.
checked
ReplyDelete